Stock Code: 874632

RW90 XHHW-2 600V1000V XLPE Insulation Wire Copper

These cables are used for general purpose wiring in circuits not exceeding 600/1000
volts as indicated for the sizes. May be used in wet or dry locations, installed in conduit,
duct, or open air. Suitable for use in low leakage circuits per NEC requiring a dielectric constant less than 3.5.

Application

Our comprehensive range of PVC insulated building wires ensure reliability, safety, and compliance with international standards, which are engineered with high conductivity to ensure efficient power transmission. It suitable for DC or AC 50HZ, rated voltage 450/750V and below power, household appliances, instrumentation, telecommunications equipment and lighting lines fixed laying and mobile laying cables.

Standard

UL 44 (Thermoset-Insulated Wires and Cables.)

CSA C22.2 No. 38 (Thermoset-Insulated Wires and Cables.)

ICEA S-95-658/NEMA WC70 (Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy.)

ASTM B8 (Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft.)

Construction

Conductor: annealed bare copper wires, or compact aluminum 8000 series wires, class B.

Insulation: Heat and moisture resistant, low temperature Cross-Linked Polyethylene (XLPE)

Type RW90, -40°C to +90°C

Sizes: 14 AWG – 750 kcmil.

Technical Parameter

Conductor Size No. of StrandsConductor Diameter Insulation Thickness Overall Diameter Net
Weight
Ampacity
@ 90°C
AWG/kcmilinchesmilincheslbs/kfta
147 or 190.071300.131725
127 or 190.089300.152630
107 or 190.113300.183840
87 or 190.142450.246555
67 or 190.178450.289875
47 or 190.225450.3315295
37 or 190.261450.36189115
27 or 190.283450.39233130
1190.322550.44293145
1/0190.362550.48364170
2/0190.405550.53453195
3/0190.456550.58565225
4/0190.512550.63706260
250370.558650.7837290
300370.611650.751004320
350370.661650.81157350
400370.706650.851322380
500370.789650.931634430
600610.866801.041972475
750610.968801.152448535
请在浏览器中启用JavaScript来完成此表单。