Aluminum Covered Line Wire AAAC Conductor

Stock Code: 874632

Aluminum Covered Line Wire AAAC Conductor

Covered Line Wire are intended primary for the distribution of electrical energy under normal condition of overhead (aerial) installation and service outdoors. Approved for use on insulators for overhead circuits. Otherwise treated as a bare conductor.

The cables maintain optimal performance in typical environmental conditions while ensuring reliable power transmission across overhead networks. Their design prioritizes both electrical efficiency and mechanical durability for sustained service in aerial installations.

Application

AAAC (All Aluminum-Alloy Conductor)‌ serves as a bare overhead conductor specifically engineered for primary and secondary electrical distribution systems. The conductor incorporates high-strength aluminum-alloy material that achieves an optimal strength-to-weight ratio while maintaining superior sag resistance.

Key Performance Advantages:

Enhanced durability‌: The 6201-T81 aluminum-alloy composition provides higher corrosion resistance compared to traditional ACSR (Aluminum Conductor Steel Reinforced)

Structural efficiency‌: Optimized mechanical properties ensure minimal sag under tension, suitable for long-span aerial installations

Standard

-ASTM B399: Specification for Concentric-Lay-Stranded Aluminum Alloy 6201-T81 Conductors.

-IEC 62004：Conductors for overhead lines – Aluminium and aluminium alloy wires for concentric lay stranded conductors

-ICEA S-61-402: Thermoplastic-Insulated Wire and Cable.

-ICEA S-66-524: Cross-Linked-Thermosetting-Polyethylene Insulated Wire and Cable.

-ICEA S-70-547: Weather Resistant Polyolefin Covered Wire and Cable.

Construction

Conductor: AAAC stranded per ASTM B399.

Separator: A suitable opaque tape, as required.

Insulation: Black cross-linked polyethylene (XLPE) or polyethylene (PE).

Maximum operating voltage: XLPE- Normal: 90 °C / PE- Normal: 75 °C

Coverings carry no voltage rating: XLPE- Emergency: 130 °C / PE- Emergency: 95 °C

Maximum conductor operation temperatures: XLPE- Short Circuit: 250 °C / PE- Short Circuit: 150 °C

Technical Parameter

Code Name	Size	No. of wires	Insulation Thickness	Overall Diameter	Rated Strength	Nominal Weight				Allowable Ampacity
Code Name	Size	No. of wires	Insulation Thickness	Overall Diameter	Rated Strength	Aluminum	LDPE	HDPE	XLPE	Allowable Ampacity
	AWG or kcmil		mm²	mm	kg	kg/km	kg/km	kg/km	kg/km	A
Walnut	6	45809	0.762	6.553	540	36.64	69.94	71.43	71.43	105
Butternut	4	45809	0.762	7.874	844	58.04	107.15	107.15	107.15	135
Hickory	4	45839	0.762	8.052	1070	58.04	120.54	122.03	122.03	135
Pignut	2	45809	1.143	10.312	1293	92.27	175.6	177.09	177.09	180
Beech	2	45839	1.143	10.643	1651	92.27	199.41	199.41	199.41	180
Chestnut	1	45809	1.143	11.303	1610	116.37	17.27	218.76	218.76	210
Almond	1/0	45809	1.524	13.157	1987	146.73	282.75	284.24	284.24	235
Pecan	2/0	45809	1.524	14.402	2404	184.98	348.23	349.72	349.72	290
Filbert	3/0	45809	1.524	15.799	3003	233.34	430.08	433.05	433.05	305
Buckeye	4/0	45809	1.524	17.348	3787	394.21	531.27	535.74	535.74	345
Hackberry	266.8	45675	1.524	18.517	3121	372.63	525.32	528.3	528.3	356

Get in Contact

Eastful's headquarters is located in Chongqing, China, and serves as the main point of contact for our global operations. With additional offices strategically positioned worldwide, we are always within reach to assist our customers and partners.

Click Here

Stock Code: 874632